Our products

Product catalogue

Browse our full range of equipment and products for cathodic protection and pipeline management.

Request a quote

Exclusive suppliers

Filtre :Protection cathodique125 produits

Anodes

Sur mesure

Réf. DIP-123

MMO wire anode (WIRE)

MMO wire anode custom-assembled by IPSI for confined spaces and special shapes: boreholes, tank bottoms, suspended anodes, internal protection. Ø1.6 or 3.2 mm.

Fiche technique

En stockSur devis

Réf. DIP-006

Magnesium anodes

Sacrificial magnesium anodes for the cathodic protection of buried structures or those in fresh water. Two alloys (1.55 V and 1.75 V), round or D-shape, supplied bare or pre-backfilled.

Fiche technique

Sur devisSur mesure

Réf. DIP-032

Iron-silicon anodes

High-silicon cast iron anodes (Fe/Si and Fe/Si/Cr) for impressed-current cathodic protection. Range from 2 to 50 kg, for fresh water, sea water and backfill.

Fiche technique

En stock

Réf. DIP-057

MMO tubular anode (LIDA® One)

MMO tubular anode 'LIDA® One' (1" titanium tube) with single-anode concept, formulated for carbonaceous backfill. For CP of buried structures in variable-resistivity soils.

Fiche technique

Réf. DIP-113

Anode centralizer

Anode centralizer for cathodic protection boreholes: keeps the anode in the centre of the borehole tube. Compatible with Fe/Si, Ti-MMO, graphite anodes (Ø 25, 50 or 75 mm), adjustable fins.

Fiche technique

En stock

Réf. DIP-052

Anodeflex – MMO linear anode

MMO linear anode (Ir-Ta titanium wire) combined with a copper cable in a conductive coke sock. Ideal for distributed low-current cathodic protection.

Fiche technique

Réf. DIP-002

Coke breeze backfill

Coke breeze backfill, 0-10 mm grading, for cathodic protection anodes: low soil resistivity and high porosity at minimal cost. Supplied in 1-tonne crates.

Fiche technique

Réf. DIP-149

MMO anode for tanks

MMO anode (coated titanium substrate) for the internal cathodic protection of tanks, rated for 20 years. Part of a complete system (rectifier, cables, electrodes).

Fiche technique

Réf. DIP-126

Aluminium-indium anode (Al-Zn-In)

Sacrificial aluminium-zinc-indium (US-Mil) anode particularly suited to sea water. Potential -1075 mV (Ag/AgCl), capacity 3.8 kg/A·yr, API 5L X52 steel insert.

Fiche technique

Réf. DIP-190

Linear AC mitigation anode

Linear earthing system for mitigating induced alternating currents on pipelines near HV lines. Stranded bare copper conductor and low-resistivity backfill.

Fiche technique

Réf. DIP-193

Linear AC mitigation anode (linear anode)

Linear earthing system for mitigating induced alternating currents on pipelines near HV lines. Stranded bare copper conductor and low-resistance backfill.

Fiche technique

Sur mesure

Réf. DIP-056

MMO anode in canister

MMO wire anode pre-packed in a galvanised steel canister filled with calcined coke, for shallow anode beds and wet or marshy soils. Lightweight and easy to install.

Fiche technique

Réf. DIP-128

Soft iron anodes

Pure (soft) iron galvanic anode for protecting copper-alloy tubes against corrosion: heat exchangers, condensers, desalination, power-plant cooling. Blocks from 2 to 14 kg.

Fiche technique

Réf. DIP-091

MMO wire anodes

LIDA® wire anodes: copper-cored titanium wire coated with mixed metal oxide (MMO), Ø1.5 or 3 mm. Very low consumption rate, calculated life 15 to 20 years.

Fiche technique

Sur mesure

Réf. DIP-051

Strung MMO tubular anodes

Titanium tubular anodes with mixed metal oxide (MMO) coating, string-mounted, for impressed-current cathodic protection. Very low consumption rate.

Fiche technique

Réf. DIP-054

Pre-backfilled zinc anode 14 kg

14 kg sacrificial zinc anode (ASTM B-418 type I), bare or pre-backfilled in a bag, for cathodic protection and earthing. Capacity 780 Ah/kg, efficiency 90%.

Fiche technique

Réf. DIP-053

Pre-backfilled zinc anode 7 kg

7 kg sacrificial zinc anode, bare or pre-backfilled in a bag, for cathodic protection and earthing of metal structures. Capacity 780 Ah/kg, efficiency 90%.

Fiche technique

Réf. DIP-133

Petroleum backfill for boreholes

Special borehole petroleum coke backfill (2-5 mm grading), density close to 1 for easy placement below the water table. Very low resistivity (<50 Ω·cm), packed in 1 t.

Fiche technique

Réf. DIP-119

Backfill for galvanic anodes

Backfill (fill compound) for zinc and magnesium galvanic anodes: improves current efficiency and provides a uniform low-resistance environment around the anode.

Fiche technique

Réf. DIP-233

Backfill for galvanic anodes (bulk)

Bulk backfill (fill compound) for zinc and magnesium galvanic anodes: improves current efficiency and provides a uniform low-resistance environment around the anode.

Fiche technique

Réf. DIP-139

Steel roller/runner centralizer

Steel centralizer, with rollers or runners, to insert a carrier pipe into a casing (road or railway crossings). Reduces friction, electrically isolates the tubes.

Fiche technique

Réf. DIP-069

Vent-pipe drain – 50 m sock coil D100

Drain sock to slip over the vent pipes of cathodic protection boreholes to prevent clogging by coke backfill. 50 m coil, Ø100.

Fiche technique

Réf. DIP-116

Ruban de zinc

Ruban de zinc : anode galvanique continue en zinc pour la protection cathodique, la mitigation des courants alternatifs et la mise à la terre des canalisations enterrées.

Réf. DIP-076

Magnesium ribbon

Extruded magnesium ribbon (1.75 V alloy) on a steel core, sometimes used instead of sacrificial anodes. Supplied in 305 m reels, capacity 1,230 Ah/kg.

Fiche technique

En stock

Réf. DIP-018

EVT100 borehole vent pipe

EVT100 vent pipe for cathodic protection boreholes, in slotted PVC Ø100 mm, 4 m pre-socketed length. Allows gas venting and anode fixing.

Fiche technique

Réf. DIP-115

Anode support tubes

High-strength PVC anode support tubes DN50 (2"), screw-fit (DIN 4925 thread), 3 or 6 m lengths, to support MMO anode strings in cathodic protection boreholes.

Fiche technique

Réf. DIP-121

ZINC US-MIL

Anode sacrificielle en zinc pour protection cathodique galvanique. Idéale en sol de faible résistivité, dissolution régulière et rendement élevé.

Transformateur redresseur

Réf. DIP-036

Air-cooled transformer rectifier

Air-cooled cathodic-protection transformer rectifier: output of 12 to 150 V and 1 to 250 A DC. Manual, semi-automatic or automatic regulation; steel, polyester or rack enclosure.

Fiche technique

Réf. DIP-035

Oil-cooled transformer rectifier

Oil-cooled cathodic-protection transformer rectifier: output 50 to 150 V and 50 to 250 A DC. Manual or semi-automatic regulation, weatherproof steel enclosure IP55/IK10.

Fiche technique

Réf. DIP-013

Polarisation cell CES 285

Polarisation cell (Kirk Cell) CES 285: protects buried pipelines against induced AC and earth-fault currents, without blocking cathodic protection.

Fiche technique

Réf. DIP-029

Decoupling cells

Decoupling cells to protect insulating joints and provide AC mitigation: they block the cathodic protection DC current while draining AC faults.

Fiche technique

Réf. DIP-007

Current drainage box CAA / CSC

Anodic (CAA) or cathodic (CSC) supply box to connect anode or structure cables to the transformer rectifier and measure current. Weatherproof IP55/IK10.

Fiche technique

Réf. DIP-234

DEC100 – decoupling cell

DEC100 decoupling cell for transport networks (SAFE environment): protects against direct lightning (100 kA) and blocks DC voltages. Holding current 20-60 A peak.

Fiche technique

Réf. DIP-033

FAC100 – Decoupling cell / AC filter

FAC100 decoupling cell: blocks the cathodic protection DC current between two structures while letting AC through. Nominal current 32 or 40 A AC. Non-ATEX.

Fiche technique

Réf. DIP-152

1.5 V batteries (impressed-current supply)

High-capacity 1.5 V batteries (1200 to 4800 Ah) to convert a galvanic-anode system into an impressed-current one, maintenance-free. Life ≥2 years, heavy-metal-free, -20 to +50 °C.

Fiche technique

Réf. DIP-046

PCR polarisation cell

PCR polarisation cell: decouples the cathodic protection DC current while draining continuous or fault AC currents. Protects insulating joints and structures. ATEX zone 2.

Fiche technique

Réf. DIP-014

Silica gel

Moisture-absorbing 'Envirogel' silica gel beads with orange→green colour indicator. For drum, tank and transformer breathers. Free of DMF and cobalt.

Fiche technique

Réf. DIP-086

Selection guide – air-cooled transformer rectifier

Selection guide to configure an air-cooled transformer rectifier: power supply, cooling, regulation, output, terminals, display and measurement options to specify when ordering.

Fiche technique

Réf. DIP-085

Selection guide – oil-cooled transformer rectifier

Selection guide to configure an oil-cooled transformer rectifier: power supply, regulation, output, terminals, display and measurement options to specify when ordering.

Fiche technique

Transformateur redresseur IPSI Solutions

Sur mesure

Transformer rectifier

Custom-built workshop transformer rectifiers for impressed-current cathodic protection. All power ratings.

Fiche technique

Réf. DIP-132

Transformer rectifier – high-power range

High-power cathodic protection transformer rectifiers (50 to 250 A), single- or three-phase. Autotransformer or mixed-bridge regulation, choke-capacitor filtering. Many options.

Fiche technique

Électrodes

Réf. DIP-075

Stelth 7 Rocket electrode

Borin Stelth 7 Rocket permanent reference electrode with coupon, profiled shape, for 'on/off' measurements without switching off interfering systems. Stability 5 mV over 30 years.

Fiche technique

Réf. DIP-098

Calomel reference electrode

Calibrated calomel reference electrode (REF401), traceable to the hydrogen electrode. Laboratory working standard for verifying other reference electrodes.

Fiche technique

Réf. DIP-124

Reference electrode Stelth 8

Borin Stelth 8 fixed reference electrode for fresh and sea water, with porous ceramic plug. Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄. Service life ≥20 years, Teflon probe, stainless housing.

Fiche technique

Réf. DIP-213

Sea-water reference electrode (silver or zinc)

Rugged sea-water reference electrode: 99.90% pure silver (AG20S) for measurement campaigns or permanent installation, or pure zinc for long-term measurements. Estimated 15-year life.

Fiche technique

Réf. DIP-120

Fixed reference electrode Stelth 1

Borin Stelth 1 reference electrode (half-cell), monolithic and maintenance-free: Cu/CuSO₄, Ag/AgCl, Zn/ZnSO₄ or hydrocarbon-proof Pd/PdCl. Service life ≥10 years, Ø25 × 203 mm.

Fiche technique

Électrode de référence permanente Stelth 2

Réf. DIP-044

Permanent reference electrode Stelth 2

Borin Stelth 2 permanent reference electrode for buried or in-concrete installation. Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄; 180 cm² contact, service life ≥30 years.

Fiche technique

Électrode de référence permanente Stelth 7

Réf. DIP-074

Permanent reference electrode Stelth 7

Borin Stelth 7 permanent reference electrode with coupon, for 'on/off' measurements without switching off interfering systems. Stability 5 mV over 30 years, all soils and waters.

Fiche technique

Réf. DIP-058

Portable reference electrode

RE-series portable Cu/CuSO₄ reference electrode with orange Lexan tube and ceramic tip. Fast wetting, usable minutes after filling, low resistance.

Fiche technique

Électrode de référence portable Stelth 3

Réf. DIP-072

Portable reference electrode Stelth 3

Borin Stelth 3 portable reference electrode (half-cell), monolithic, maintenance-free: Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄. Service life ≥10 years, shockproof Lexan housing, Ø25 × 203 mm.

Fiche technique

Électrode de référence portable Stelth 4

Réf. DIP-073

Portable reference electrode Stelth 4

Borin Stelth 4 portable reference electrode (half-cell), monolithic, maintenance-free: Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄. Service life ≥10 years, short format Ø57 × 102 mm.

Fiche technique

Réf. DIP-194

Bagged electrode

Bagged reference electrode for highly resistive and free-draining soils (sand, gravel). Cu/CuSO₄, Zn/ZnSO₄ or Ag/AgCl, in an ABS tube and non-polarising backfill.

Fiche technique

Appareils de mesures

Réf. DIP-131

AP100 STD potential alarm

Autonomous AP100 STD potential alarm (non-ATEX) for visual checking of a cathodic protection system by non-specialist personnel. Very low power, fully digital design.

Fiche technique

Réf. DIP-087

Potential alarm AP100 and AP200 (ADF or Standard)

Autonomous cathodic-protection potential monitoring alarm. The AP200 adds a remote relay output. 10-year battery life, standard (IP66) or flameproof (Ex II 2 G) versions.

Fiche technique

Réf. DIP-135

AP200 ATEX potential alarm with remote output

Flameproof AP200 potential alarm (ATEX zone 2) with remote reporting. Marine aluminium enclosure Ex II 2 G – Eexd IIC T6, IP56, 10-year battery life, lithium battery.

Fiche technique

Réf. DIP-191

Coupon (témoin) 1, 5 ou 10 cm²

Ensemble coupon (témoin métallique) de 1, 5 ou 10 cm² pour le suivi de la protection cathodique des structures enterrées.

Réf. DIP-104

CR100 cyclic interrupter

Compact CR100 cyclic interrupter for On/Off measurements on a single-rectifier structure or galvanic anodes. Dry contact with no voltage drop, breaking capacity 20 A / 60 V.

Fiche technique

Réf. DIP-095

Soil Box for soil and water measurement

Box for measuring the resistivity of soils and liquids, usable on site or in the laboratory. Used with an earth-resistance meter; compaction procedure to ASTM G-57.

Fiche technique

Réf. DIP-178

HI99121 soil pH meter

HI99121 soil pH meter in a case, for directly measuring soil pH with a conical-tip electrode and built-in temperature sensor. Simultaneous pH/temperature display, watertight housing.

Fiche technique

Réf. DIP-078

Measurement accessories

Ø4 mm extra-flexible PVC-insulated test leads: rear-entry (600 V CAT II), angled plugs (1000 V CAT III) or test probes. Lengths 50 to 200 cm, 3 colours.

Fiche technique

Réf. DIP-030

CI-100 – Current interrupter with GPS

Portable CI-100 current interrupter with continuous GPS synchronisation, up to 100 A / 250 V DC or 600 V AC. 5 time programmes, IP67 enclosure, cycle ¼ s to 6 min.

Fiche technique

Réf. DIP-028

GPS-synchronised current interrupter CI-100/CI-200 (Cath-Tech)

Rugged CI-100 and CI-200 GPS-synchronised current interrupters, up to 100 or 200 A. Switch a T/R positive/negative, primary AC or anodes; cycle ¼ s to 60 s.

Fiche technique

Réf. DIP-094

Coupon stake 100 cm²

Coupon stake with a calibrated 100 cm² measuring rod to drive into the ground, head with yellow SLB4 safety socket. Available in 5, 10, 25, 50 and 100 cm² ratings.

Fiche technique

Réf. DIP-050

Measurement shunts

Measurement shunts from 1 to 6000 A for monitoring cathodic protection DC current. Default voltage 100 mV (50 or 200 mV on request), class 0.5 or 1.

Fiche technique

Réf. DIP-232

MW9420 earth/resistivity meter

MW9420 earth meter (stakes, selective clamp, 2-clamp) and soil resistivity meter, suited to cathodic protection. Compact housing, graphic LCD, 20 h battery life, 50 V CAT IV safety.

Fiche technique

Réf. DIP-235

TMS bagged coupon

TMS bagged corrosion coupon (steel) from 1 to 100 cm², pre-conditioned in a 25 Ω·m resistivity soil bag. Supplied with 5 m of H07-RNF cable; TMS size-length-cable coding.

Fiche technique

Réf. DIP-216

WinLog 2.0 – MiniLog2 software

WinLog 2.0 software for processing MiniLog2 measurements: USB transfer, 4 channels (EOn/EOff/IDC/IAC), statistics, curve editing, Excel export, DCVG/CIPS G-Maps routes.

Fiche technique

Réf. DIP-136

AP200 STD potential alarm

Autonomous AP200 STD potential alarm (non-ATEX) in a compact IP66 ABS housing, for visual checking of a cathodic protection system. 10-year battery life, very low power.

Fiche technique

Réf. DIP-071

µPclog 101A data logger

µPclog 101A data logger for monitoring cathodic protection potentials. -8 to +24 V DC or ±160 mV DC versions, password, alarm and configurable units.

Fiche technique

Réf. DIP-101

Stray current generator

Variable voltage/current generator ±24 V / ±10 A to connect between two buried structures, to simulate stray currents (SNCF, RER, tram) for training and testing.

Fiche technique

Réf. DIP-008

GPS-synchronised current interrupter CI-25 to CI-200

Cath-Tech GPS-synchronised current interrupter, CI-25 to CI-200 range, for ON/OFF (instant-off) potential measurement campaigns in cathodic protection.

Fiche technique

Réf. DIP-011

PeakTech P2680A – High-voltage insulation tester 5000 V

PeakTech P2680A high-voltage insulation tester, test voltage up to 5,000 V and measurement up to 1 TΩ. For checking insulating joints and cables in cathodic protection.

Fiche technique

Réf. DIP-025

RF-IT – Above Ground Tester for pipeline insulators

RF-IT tester for checking above-ground pipeline insulating joints by radio frequency (221 kHz). Locates the short-circuit point, usable under cathodic protection.

Fiche technique

Réf. DIP-099

Measurement shunt 1 A

Low-current measurement shunts (10 mA, 100 mA, 1 A — 100 mV) with IEC plugs, suited to PM100 and PMM200 boxes. To measure current via a voltmeter or recorder.

Fiche technique

Réf. DIP-100

Measurement shunt 10 A

10 A measurement shunt with IEC plugs, suited to PM100 and PMM200 boxes. To measure the current of a connection via a voltmeter or to make a recording.

Fiche technique

Réf. DIP-162

MIC insulator tester (M.C. Miller)

MIC digital insulation tester (M.C. Miller) with radio-frequency technology for CP: distinguishes insulation short-circuits from interconnected pipelines. Compact, Pass/Fail LEDs.

Fiche technique

Réf. DIP-103

Portable reference electrode with 7 m cable

RE-series portable Cu/CuSO₄ reference electrode with orange Lexan tube and ceramic tip, supplied with 7 m of cable. Fast wetting, usable minutes after filling.

Fiche technique

Coffrets, accessoires & raccordements

Réf. DIP-196

KYNAR cable (PVDF)

KYNAR (PVDF/HMWPE) cable with copper conductor, excellent chemical resistance (notably to chlorine) and underwater. Ideal for offshore CP, boreholes and anode beds. Sizes 10 to 35 mm², 0.6/1 kV.

Fiche technique

Réf. DIP-001

Secure PM100 measurement point

Secure stainless-steel potential test point for cathodic protection, fitted with an 8-way measurement plate and closed by a triangle lock. IP44, height 1,200 mm.

Fiche technique

Réf. DIP-137

BC50 measurement terminal

BC50 potential test terminal (adjustable height 1600 mm, IP43 / IK10) for concentrated sites and pipeline routes. Configurable: 8VS, 2/4-way plate or Viking terminal block 1.5-70 mm².

Fiche technique

Réf. DIP-092

Resin-fill branch box Y

Universal resin-fill branch box (Y range) for 0.6/1 kV LV cables (copper or aluminium). Watertight, high-quality shells, resin storable up to 40 months.

Fiche technique

Réf. DIP-080

Resin-fill junction box

Universal resin-fill junction box for 0.6/1 kV LV cables (copper or aluminium). Transparent polycarbonate shells, watertight, anti-hydrolysis PUR resin.

Fiche technique

Réf. DIP-040

U1000 R2V cable

Unarmoured rigid U1000 R2V cable (NF C 32-321) with copper conductor, XLPE insulation and black PVC sheath. For power supply or fixed-station links. Sizes 1.5 to 70 mm².

Fiche technique

Réf. DIP-064

6D box

6D aluminium measurement box to connect buried cathodic protection equipment and take potential or current measurements. 2 to 6 copper bars.

Fiche technique

Réf. DIP-066

AJB box

AJB measurement and distribution box in sheet steel (IP55, 100×80×30 cm), with 10 RBCA 1 Ω/100 W resistors, 10 shunts 10 A/100 mV and copper bars. On two support tubes.

Fiche technique

Réf. DIP-017

Exd distribution box

Flameproof (Exd) current distribution box for cathodic protection, configurable to order. Example: 300×500 mm, 11 copper sectioning bars and a shunt.

Fiche technique

Réf. DIP-067

NJB box

NJB measurement and distribution box in sheet steel (IP55, 100×80×30 cm), with 12 RBCA 1 Ω/100 W resistors, 12 shunts 10 A/100 mV and 13 copper bars. On two support tubes.

Fiche technique

Réf. DIP-062

PCTE box

PCTE measurement and distribution box in sheet steel (IP55, 60×80×30 cm), with 8 RBCA 1 Ω/100 W resistors, 8 shunts 10 A/100 mV and copper bars. On a galvanised support tube.

Fiche technique

Réf. DIP-065

PMD box

PMD measurement and distribution box in sheet steel (IP55, 100×80×30 cm), with 12 RBCA 1 Ω/100 W resistors, 12 shunts 10 A/100 mV and 13 copper bars. On two support tubes.

Fiche technique

Réf. DIP-015

Exd distribution box

Flameproof (Exd) current distribution box for cathodic protection, configurable to order. Example: 300×500 mm, 10 resistors 100 W, 11 sectioning bars.

Fiche technique

Réf. DIP-026

Exd insulating joints box

Flameproof shunting box (Exd, ATEX zones 1 and 2) to control cathodic protection interference between pipelines. Marine aluminium alloy, IP66.

Fiche technique

Réf. DIP-065B

Coffret simple

Coffret simple pour raccordement et protection des connexions en installation de protection cathodique.

Réf. DIP-037

Tubular cable lugs

Crimp tubular cable lugs in tinned electrolytic copper, with inspection hole and flared entry. Sizes from 1.5 to 16 mm² and above, M2 to M12 bores. Packed in 100s.

Fiche technique

Réf. DIP-003

H07RN-F cable

H07RN-F round neoprene cable 450/750 V with flexible copper conductor, for the power or control supply of mobile equipment. Sizes from 1.5 to 70 mm², black PCP sheath.

Fiche technique

Réf. DIP-090

H07RN-F TENAFLEX® SR cable

H07RN-F TENAFLEX® SR round neoprene cable 450/750 V with flexible copper conductor, conductor 85 °C. Low voltage drop, sizes 1.5 to 70 mm². CENELEC/UTE/BS standards.

Fiche technique

Réf. DIP-088

H07RN-F TITANEX® cable

H07RN-F TITANEX® round neoprene cable 450/750 V (HD 22.4 / NF C 32-102-4) with flexible copper conductor. For mobile equipment and demanding installations. Sizes 1.5 to 70 mm².

Fiche technique

Réf. DIP-089

XLPE/PVC/SWA/PVC cable

XLPE/PVC/SWA/PVC armoured power cable (BS 5467) 0.6/1 kV, copper conductor, XLPE insulation, galvanised steel wire armour. Reinforced mechanical protection, sizes 1.5 to 120 mm².

Fiche technique

Réf. DIP-027

Cathodic protection cable

Single-core 0.6/1 kV cable for the DC supply of cathodic protection circuits of buried or immersed structures. Copper conductor, HDPE insulation, black PVC sheath.

Fiche technique

Réf. DIP-198

Pin brazing S30 X/C (stud welding)

Portable S30 X/C pin-brazing unit to connect cables in cathodic protection and earthing. 360° weld on steel, 40-60 brazes per charge, 36 V DC, interchangeable batteries.

Fiche technique

Réf. DIP-146

Platine 1 R

Platine 1 R — accessoire de raccordement pour installations de protection cathodique.

Réf. DIP-130

8VS measurement plate

8VS monobloc measurement plate (IP2x) for the cathodic protection of buried or immersed structures. 8-way 16 mm² connector, gold-plated watertight Ø4 banana terminals.

Fiche technique

Réf. DIP-147

Resistor plates

Custom-built current-exchange management plates: 1 to several resistors (0.1 to 470 Ω, 25 to 950 W), choice of ways, shunts, with or without enclosure (Exd, steel, stainless).

Fiche technique

Réf. DIP-084

Claw connectors

Tinned claw connectors (hot-stamped brass, steel hardware) for cable connection by stirrup. Sizes from 4 to 150 mm² depending on reference, packed in 10s or 25s.

Fiche technique

Réf. DIP-063

RBC-RBCA resistor

Low-value, high-dissipation RBC/RBCA adjusting resistors, ribbon or wire wound on steatite. Power 25 to 600 W, values 0.056 to 680 Ω, surface up to 450 °C.

Fiche technique

En stock

Accessoires de câblage

Divers accessoires de câblage et installation : trousses de jonction ou dérivations à couler, cosses, manchons, gaine TPC.

Fiche technique

Réf. DIP-020

Tool kit

Tool set for the inspection, maintenance and installation of cathodic protection systems, supplied in a backpack, shockproof case or metal toolbox. Configurable.

Fiche technique

Réf. DIP-068

2D box

2D aluminium measurement box to connect buried cathodic protection equipment and take potential or current measurements. 2 to 5 cable entries.

Fiche technique

Coffret de répartition

Coffret de raccordement des éléments de protection cathodique (puissance et mesure), personnalisable selon l'usage.

Fiche technique

Câbles spéciaux

Câbles de puissance et de mesures adaptés à tous types d'environnements : U1000 R2V, U1000 RVFV, H07-RNF, Kynar.

Fiche technique

Réf. DIP-045

TPC corrugated conduit

Polyethylene TPC corrugated conduit (NF EN 50086-2-4) for protecting buried electrical cables and ducts. Janoflex® notched couplers, colours by network, 25 m coils.

Fiche technique

Réf. DIP-041

Warning mesh

Polyolefin warning mesh to signal a buried structure, laid 0.20 m above the pipeline. Standardised colours by network, rolls of 100 × 0.30 m.

Fiche technique

Réf. DIP-082

Janoflex TPC N

Janoflex® polyethylene TPC conduit (NF EN 50086-2-4) for protecting buried electrical cables and ducts. Notched couplers, colours by network, 25 m coils.

Fiche technique

Réf. DIP-217

Magnetic manhole cover lifter

Magnetic lifter for opening manhole covers. Ultra-compact lightweight model (3.5 kg, neodymium magnets) or heavy-duty model up to 650 kg with a triple movable magnetic plate.

Fiche technique

Réf. DIP-079

Butt-stop ferrules

Butt-stop joint ferrules in tinned electrolytic copper tube, for end-to-end conductor connection. Sizes from 1.5 to 120 mm², packed in 100s.

Fiche technique

Réf. DIP-192

Patte de fixation type RM-001A

Patte de fixation type RM-001A pour le montage d'équipements de protection cathodique (joints isolants, structures).

Réf. DIP-140

PC crossing point (6D+R box)

Aluminium PC crossing-point box for resistive electrical continuity with third-party works crossing the line. Variable RBCA resistor to attenuate interference.

Fiche technique

Réf. DIP-134

C connectors

Branch C connectors in tinned electrolytic copper for cathodic protection and industrial electricity. Sizes from 16 to 120 mm², packed in 100s or individually.

Fiche technique

Réf. DIP-081

Electrical installation tape

Scotch® electrical insulation tapes (Super 33+ and 22 vinyl) for insulating and protecting LV/HV cables. Resistant to UV, acids and alkalis, self-extinguishing.

Fiche technique

Réf. DIP-083

CADWELD® Plus welding

CADWELD® Plus exothermic welding: filler metal and ignition in a sealed capsule, no ignition powder. Permanent corrosion-insensitive bond, beyond IEEE 837.

Fiche technique

Réf. DIP-042

Exothermic welding

CADWELD® exothermic welding for permanent copper/copper, copper/steel or steel/steel electrical bonds, with no external energy source. Corrosion-resistant.

Fiche technique

Réf. DIP-019

MRL conduit

Threaded MRL conduit (ROS) for the mechanical protection of electrical wires and cables. High mechanical strength, watertight, halogen-free, non-flame-propagating. DN20 to DN50.

Fiche technique

Éclateurs de protection foudre

Dispositifs de protection foudre pour structures isolées. Gamme Dehn : EXFS100, KU, L.

Fiche technique

Réf. DIP-138

Duplix labels

Robust Duplix marking labels for identifying cables on site (digits 0-9 and letters A-Z), with label holder.

Fiche technique

Isolations de conduites

Réf. DIP-039

EXFS 100 spark gap (zone 1)

Flameproof EXFS 100 lightning-protection spark gap for zone 1 (Ex db IIC T6). Lightning current 100 kA (10/350 µs), sparkover voltage ≤1.25 kV, IP67.

Fiche technique

Réf. DIP-038

EXFS L flameproof line spark gap

Flameproof lightning-protection spark gap (ATEX zone 2) for bridging insulating elements on pipes under cathodic protection. Lightning current 50 kA, IP54.

Fiche technique

Loading…

Exclusive suppliers

A cathodic protection project?

Our engineers are at your disposal to study your requirements and propose custom-built solutions.

Réponse rapide

Sous 48h

Expertise certifiée

Ingénieurs NACE

Support continu

Maintenance 24/7