Cathodic protection
A complete range of equipment for corrosion protection of your buried and submerged infrastructures.
Our expertise
6 equipment families for your projects
Proven solutions for the lasting protection of your pipelines.
Anodes
Sacrificial anodes and impressed current anodes for all types of buried or submerged structures.
Transformer rectifier
Robust impressed current power supplies, with or without remote monitoring, for extended networks.
Electrodes
Cu/CuSO4, Ag/AgCl and Zn reference electrodes for reliable and long-lasting potential measurement.
Measuring instruments
Voltmeters, multimeters, recorders and remote monitoring systems for tracking your installations.
Junction boxes & connections
Junction boxes, measurement boxes, special cables and connection accessories.
Standards compliance
All our products comply with EN, ISO and NACE standards for corrosion protection.
Anodes
Sacrificial and impressed current anodes for all types of structures.
MMO wire anode (WIRE)
MMO wire anode custom-assembled by IPSI for confined spaces and special shapes: boreholes, tank bottoms, suspended anodes, internal protection. Ø1.6 or 3.2 mm.
View product
Magnesium anodes
Sacrificial magnesium anodes for the cathodic protection of buried structures or those in fresh water. Two alloys (1.55 V and 1.75 V), round or D-shape, supplied bare or pre-backfilled.
View product
Iron-silicon anodes
High-silicon cast iron anodes (Fe/Si and Fe/Si/Cr) for impressed-current cathodic protection. Range from 2 to 50 kg, for fresh water, sea water and backfill.
View productMMO tubular anode (LIDA® One)
MMO tubular anode 'LIDA® One' (1" titanium tube) with single-anode concept, formulated for carbonaceous backfill. For CP of buried structures in variable-resistivity soils.
View product
Anode centralizer
Anode centralizer for cathodic protection boreholes: keeps the anode in the centre of the borehole tube. Compatible with Fe/Si, Ti-MMO, graphite anodes (Ø 25, 50 or 75 mm), adjustable fins.
View product
Anodeflex – MMO linear anode
MMO linear anode (Ir-Ta titanium wire) combined with a copper cable in a conductive coke sock. Ideal for distributed low-current cathodic protection.
View product
Coke breeze backfill
Coke breeze backfill, 0-10 mm grading, for cathodic protection anodes: low soil resistivity and high porosity at minimal cost. Supplied in 1-tonne crates.
View product
MMO anode for tanks
MMO anode (coated titanium substrate) for the internal cathodic protection of tanks, rated for 20 years. Part of a complete system (rectifier, cables, electrodes).
View productAluminium-indium anode (Al-Zn-In)
Sacrificial aluminium-zinc-indium (US-Mil) anode particularly suited to sea water. Potential -1075 mV (Ag/AgCl), capacity 3.8 kg/A·yr, API 5L X52 steel insert.
View product
Linear AC mitigation anode
Linear earthing system for mitigating induced alternating currents on pipelines near HV lines. Stranded bare copper conductor and low-resistivity backfill.
View product
Linear AC mitigation anode (linear anode)
Linear earthing system for mitigating induced alternating currents on pipelines near HV lines. Stranded bare copper conductor and low-resistance backfill.
View product
MMO anode in canister
MMO wire anode pre-packed in a galvanised steel canister filled with calcined coke, for shallow anode beds and wet or marshy soils. Lightweight and easy to install.
View product
Soft iron anodes
Pure (soft) iron galvanic anode for protecting copper-alloy tubes against corrosion: heat exchangers, condensers, desalination, power-plant cooling. Blocks from 2 to 14 kg.
View product
MMO wire anodes
LIDA® wire anodes: copper-cored titanium wire coated with mixed metal oxide (MMO), Ø1.5 or 3 mm. Very low consumption rate, calculated life 15 to 20 years.
View product
Strung MMO tubular anodes
Titanium tubular anodes with mixed metal oxide (MMO) coating, string-mounted, for impressed-current cathodic protection. Very low consumption rate.
View product
Pre-backfilled zinc anode 14 kg
14 kg sacrificial zinc anode (ASTM B-418 type I), bare or pre-backfilled in a bag, for cathodic protection and earthing. Capacity 780 Ah/kg, efficiency 90%.
View product
Pre-backfilled zinc anode 7 kg
7 kg sacrificial zinc anode, bare or pre-backfilled in a bag, for cathodic protection and earthing of metal structures. Capacity 780 Ah/kg, efficiency 90%.
View product
Petroleum backfill for boreholes
Special borehole petroleum coke backfill (2-5 mm grading), density close to 1 for easy placement below the water table. Very low resistivity (<50 Ω·cm), packed in 1 t.
View product
Backfill for galvanic anodes
Backfill (fill compound) for zinc and magnesium galvanic anodes: improves current efficiency and provides a uniform low-resistance environment around the anode.
View product
Backfill for galvanic anodes (bulk)
Bulk backfill (fill compound) for zinc and magnesium galvanic anodes: improves current efficiency and provides a uniform low-resistance environment around the anode.
View product
Steel roller/runner centralizer
Steel centralizer, with rollers or runners, to insert a carrier pipe into a casing (road or railway crossings). Reduces friction, electrically isolates the tubes.
View product
Vent-pipe drain – 50 m sock coil D100
Drain sock to slip over the vent pipes of cathodic protection boreholes to prevent clogging by coke backfill. 50 m coil, Ø100.
View product
Ruban de zinc
Ruban de zinc : anode galvanique continue en zinc pour la protection cathodique, la mitigation des courants alternatifs et la mise à la terre des canalisations enterrées.
View product
Magnesium ribbon
Extruded magnesium ribbon (1.75 V alloy) on a steel core, sometimes used instead of sacrificial anodes. Supplied in 305 m reels, capacity 1,230 Ah/kg.
View product
EVT100 borehole vent pipe
EVT100 vent pipe for cathodic protection boreholes, in slotted PVC Ø100 mm, 4 m pre-socketed length. Allows gas venting and anode fixing.
View product
Anode support tubes
High-strength PVC anode support tubes DN50 (2"), screw-fit (DIN 4925 thread), 3 or 6 m lengths, to support MMO anode strings in cathodic protection boreholes.
View productZINC US-MIL
Anode sacrificielle en zinc pour protection cathodique galvanique. Idéale en sol de faible résistivité, dissolution régulière et rendement élevé.
View productTransformer rectifier
Impressed current power supplies for active cathodic protection.
Air-cooled transformer rectifier
Air-cooled cathodic-protection transformer rectifier: output of 12 to 150 V and 1 to 250 A DC. Manual, semi-automatic or automatic regulation; steel, polyester or rack enclosure.
View product
Oil-cooled transformer rectifier
Oil-cooled cathodic-protection transformer rectifier: output 50 to 150 V and 50 to 250 A DC. Manual or semi-automatic regulation, weatherproof steel enclosure IP55/IK10.
View product
Polarisation cell CES 285
Polarisation cell (Kirk Cell) CES 285: protects buried pipelines against induced AC and earth-fault currents, without blocking cathodic protection.
View product
PCR polarisation cell
PCR polarisation cell: decouples the cathodic protection DC current while draining continuous or fault AC currents. Protects insulating joints and structures. ATEX zone 2.
View product
Decoupling cells
Decoupling cells to protect insulating joints and provide AC mitigation: they block the cathodic protection DC current while draining AC faults.
View product
Current drainage box CAA / CSC
Anodic (CAA) or cathodic (CSC) supply box to connect anode or structure cables to the transformer rectifier and measure current. Weatherproof IP55/IK10.
View product
DEC100 – decoupling cell
DEC100 decoupling cell for transport networks (SAFE environment): protects against direct lightning (100 kA) and blocks DC voltages. Holding current 20-60 A peak.
View product
FAC100 – Decoupling cell / AC filter
FAC100 decoupling cell: blocks the cathodic protection DC current between two structures while letting AC through. Nominal current 32 or 40 A AC. Non-ATEX.
View product
1.5 V batteries (impressed-current supply)
High-capacity 1.5 V batteries (1200 to 4800 Ah) to convert a galvanic-anode system into an impressed-current one, maintenance-free. Life ≥2 years, heavy-metal-free, -20 to +50 °C.
View product
CIC – GPS Current Interrupter
The CIC is a GPS-synchronized current interrupter controller designed for permanent installation inside a cathodic protection transformer-rectifier, either on new equipment or as a retrofit.
View product
TMP20 temporary AC filter
TMP20 temporary AC filter for field testing: installed on temporary earths to measure AC interference on a pipeline. 20 A current (5 to 100 A on request).
View productSilica gel
Moisture-absorbing 'Envirogel' silica gel beads with orange→green colour indicator. For drum, tank and transformer breathers. Free of DMF and cobalt.
View product
Transformer rectifier
Custom-built workshop transformer rectifiers for impressed-current cathodic protection. All power ratings.
View product
Transformer rectifier – high-power range
High-power cathodic protection transformer rectifiers (50 to 250 A), single- or three-phase. Autotransformer or mixed-bridge regulation, choke-capacitor filtering. Many options.
View productElectrodes
Reference electrodes for precise and reliable potential measurement.
Portable reference electrode
RE-series portable Cu/CuSO₄ reference electrode with orange Lexan tube and ceramic tip. Fast wetting, usable minutes after filling, low resistance.
View product
Stelth 7 Rocket electrode
Borin Stelth 7 Rocket permanent reference electrode with coupon, profiled shape, for 'on/off' measurements without switching off interfering systems. Stability 5 mV over 30 years.
View product
Calomel reference electrode
Calibrated calomel reference electrode (REF401), traceable to the hydrogen electrode. Laboratory working standard for verifying other reference electrodes.
View product
Reference electrode Stelth 8
Borin Stelth 8 fixed reference electrode for fresh and sea water, with porous ceramic plug. Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄. Service life ≥20 years, Teflon probe, stainless housing.
View product
Sea-water reference electrode (silver or zinc)
Rugged sea-water reference electrode: 99.90% pure silver (AG20S) for measurement campaigns or permanent installation, or pure zinc for long-term measurements. Estimated 15-year life.
View product
Fixed reference electrode Stelth 1
Borin Stelth 1 reference electrode (half-cell), monolithic and maintenance-free: Cu/CuSO₄, Ag/AgCl, Zn/ZnSO₄ or hydrocarbon-proof Pd/PdCl. Service life ≥10 years, Ø25 × 203 mm.
View product
Permanent reference electrode Stelth 2
Borin Stelth 2 permanent reference electrode for buried or in-concrete installation. Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄; 180 cm² contact, service life ≥30 years.
View product
Permanent reference electrode Stelth 7
Borin Stelth 7 permanent reference electrode with coupon, for 'on/off' measurements without switching off interfering systems. Stability 5 mV over 30 years, all soils and waters.
View product
Portable reference electrode Stelth 3
Borin Stelth 3 portable reference electrode (half-cell), monolithic, maintenance-free: Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄. Service life ≥10 years, shockproof Lexan housing, Ø25 × 203 mm.
View product
Portable reference electrode Stelth 4
Borin Stelth 4 portable reference electrode (half-cell), monolithic, maintenance-free: Cu/CuSO₄, Ag/AgCl or Zn/ZnSO₄. Service life ≥10 years, short format Ø57 × 102 mm.
View product
Portable reference electrode with 7 m cable
RE-series portable Cu/CuSO₄ reference electrode with orange Lexan tube and ceramic tip, supplied with 7 m of cable. Fast wetting, usable minutes after filling.
View product
Bagged electrode
Bagged reference electrode for highly resistive and free-draining soils (sand, gravel). Cu/CuSO₄, Zn/ZnSO₄ or Ag/AgCl, in an ABS tube and non-polarising backfill.
View productMeasuring instruments
Instruments and remote monitoring systems for tracking your installations.
AP100 STD potential alarm
Autonomous AP100 STD potential alarm (non-ATEX) for visual checking of a cathodic protection system by non-specialist personnel. Very low power, fully digital design.
View product
Potential alarm AP100 and AP200 (ADF or Standard)
Autonomous cathodic-protection potential monitoring alarm. The AP200 adds a remote relay output. 10-year battery life, standard (IP66) or flameproof (Ex II 2 G) versions.
View product
AP200 ATEX potential alarm with remote output
Flameproof AP200 potential alarm (ATEX zone 2) with remote reporting. Marine aluminium enclosure Ex II 2 G – Eexd IIC T6, IP56, 10-year battery life, lithium battery.
View product
Test coupon 1, 5 or 10 cm²
Ensemble coupon (témoin métallique) de 1, 5 ou 10 cm² pour le suivi de la protection cathodique des structures enterrées.
View product
CR100 cyclic interrupter
Compact CR100 cyclic interrupter for On/Off measurements on a single-rectifier structure or galvanic anodes. Dry contact with no voltage drop, breaking capacity 20 A / 60 V.
View product
Soil Box for soil and water measurement
Box for measuring the resistivity of soils and liquids, usable on site or in the laboratory. Used with an earth-resistance meter; compaction procedure to ASTM G-57.
View product
HI99121 soil pH meter
HI99121 soil pH meter in a case, for directly measuring soil pH with a conical-tip electrode and built-in temperature sensor. Simultaneous pH/temperature display, watertight housing.
View product
Measurement accessories
Ø4 mm extra-flexible PVC-insulated test leads: rear-entry (600 V CAT II), angled plugs (1000 V CAT III) or test probes. Lengths 50 to 200 cm, 3 colours.
View product
CI-100 – Current interrupter with GPS
Portable CI-100 current interrupter with continuous GPS synchronisation, up to 100 A / 250 V DC or 600 V AC. 5 time programmes, IP67 enclosure, cycle ¼ s to 6 min.
View product
CPC cathodic protection recorder
Watertight CPC recorder for all common cathodic protection measurements (ON/OFF potential, AC, current, isolated channel). Bluetooth link to the IHPC software (Windows/Android).
View product
GPS-synchronised current interrupter CI-100/CI-200 (Cath-Tech)
Rugged CI-100 and CI-200 GPS-synchronised current interrupters, up to 100 or 200 A. Switch a T/R positive/negative, primary AC or anodes; cycle ¼ s to 60 s.
View product
Coupon stake 100 cm²
Coupon stake with a calibrated 100 cm² measuring rod to drive into the ground, head with yellow SLB4 safety socket. Available in 5, 10, 25, 50 and 100 cm² ratings.
View product
Measurement shunts
Measurement shunts from 1 to 6000 A for monitoring cathodic protection DC current. Default voltage 100 mV (50 or 200 mV on request), class 0.5 or 1.
View product
MW9420 earth/resistivity meter
MW9420 earth meter (stakes, selective clamp, 2-clamp) and soil resistivity meter, suited to cathodic protection. Compact housing, graphic LCD, 20 h battery life, 50 V CAT IV safety.
View product
TMS bagged coupon
TMS bagged corrosion coupon (steel) from 1 to 100 cm², pre-conditioned in a 25 Ω·m resistivity soil bag. Supplied with 5 m of H07-RNF cable; TMS size-length-cable coding.
View product
WinLog 2.0 – MiniLog2 software
WinLog 2.0 software for processing MiniLog2 measurements: USB transfer, 4 channels (EOn/EOff/IDC/IAC), statistics, curve editing, Excel export, DCVG/CIPS G-Maps routes.
View product
ACVG VM-510FFL+ with hoop
ACVG VM-510FFL+ equipment with hoop for fault detection on high-insulation structures (up to 2 MΩ). Locates cable and faults simultaneously, with depth and current.
View product
Potential alarm AP100 and AP200
ATEX / safe-area AP100 and AP200 potential alarms for visual monitoring of cathodic protection.
View product
AP200 STD potential alarm
Autonomous AP200 STD potential alarm (non-ATEX) in a compact IP66 ABS housing, for visual checking of a cathodic protection system. 10-year battery life, very low power.
View product
CTL-3000 DCVG
CTL-3000 DCVG voltage-gradient meter for locating and sizing coating defects on buried pipelines. Single operator, auto-zero function, supplied in an IP67 case.
View product
CorrReader PRO
CorrReader PRO potential recorder for non-specialist technicians: continuous DC/AC On/Off logging with GPS, time-stamping and SD card. Watertight, 2-year warranty.
View product
µPclog 101A data logger
µPclog 101A data logger for monitoring cathodic protection potentials. -8 to +24 V DC or ±160 mV DC versions, password, alarm and configurable units.
View product
Stray current generator
Variable voltage/current generator ±24 V / ±10 A to connect between two buried structures, to simulate stray currents (SNCF, RER, tram) for training and testing.
View product
Hexcorder PRO
Hexcorder PRO: high-end CIPS/DCVG/ACVG recorder for surveying buried pipelines. Real-time Eon/Eoff display and coating-defect detection.
View product
GPS-synchronised current interrupter CI25/CI50
CI-25TS and CI-50TS GPS-synchronised current interrupters (Cath-Tech), up to 25 or 50 A. Switch a T/R positive/negative, primary AC or anodes; cycle ¼ s to 60 s, daily programmes.
View product
MiniLog2 – CIPS/DCVG data logger
Watertight MiniLog2 data logger, 2 GPS-synchronised DC+AC microvolt channels, with built-in relay switching rectifiers, flanges and coupons. 1,300,000-reading memory (~40 h), DCVG/CIPS.
View product
Peaktech P2680A – High-voltage insulation tester
High-voltage insulation tester up to 5,000 V for checking insulating joints and coatings in cathodic protection.
View product
Coupon cell
Coupon stake with a calibrated measuring rod to drive into the ground, head with yellow SLB4 safety socket. Standard 25 cm² rating (available in 5, 10, 25, 50 and 100 cm²).
View product
Measurement well
PVC Ø50 mm measurement well with buried test coupon, silver brazing and epoxy resin. Areas from 1 to 100 cm², heights 0.50 or 1.45 m, H07RN-F cable.
View product
RF-IT – Above Ground Tester for pipeline insulators
RF-IT tester for checking above-ground pipeline insulating joints by radio frequency (221 kHz). Locates the short-circuit point, usable under cathodic protection.
View productMeasurement shunt 1 A
Low-current measurement shunts (10 mA, 100 mA, 1 A — 100 mV) with IEC plugs, suited to PM100 and PMM200 boxes. To measure current via a voltmeter or recorder.
View product
Measurement shunt 10 A
10 A measurement shunt with IEC plugs, suited to PM100 and PMM200 boxes. To measure the current of a connection via a voltmeter or to make a recording.
View product
SRM100A resistivity and pH probe
Single SRM100A probe measuring soil resistivity and pH simultaneously in under two minutes. Eliminates the spacing/depth errors of classic methods. Watertight ABS housing NEMA4/IP64.
View product
MIC insulator tester (M.C. Miller)
MIC digital insulation tester (M.C. Miller) with radio-frequency technology for CP: distinguishes insulation short-circuits from interconnected pipelines. Compact, Pass/Fail LEDs.
View product
Boxed coupon
Boxed metallic coupon (test specimen) for cathodic protection monitoring, supplied with a 5 m 2×1.5 mm² flexible cable. Sizes from 1.5 to 100 cm², cable and conductors on request.
View productJunction boxes, accessories & connections
Junction boxes, measurement boxes and connection accessories.
KYNAR cable (PVDF)
KYNAR (PVDF/HMWPE) cable with copper conductor, excellent chemical resistance (notably to chlorine) and underwater. Ideal for offshore CP, boreholes and anode beds. Sizes 10 to 35 mm², 0.6/1 kV.
View product
Secure PM100 measurement point
Secure stainless-steel potential test point for cathodic protection, fitted with an 8-way measurement plate and closed by a triangle lock. IP44, height 1,200 mm.
View product
BC50 measurement terminal
BC50 potential test terminal (adjustable height 1600 mm, IP43 / IK10) for concentrated sites and pipeline routes. Configurable: 8VS, 2/4-way plate or Viking terminal block 1.5-70 mm².
View product
Resin-fill branch box Y
Universal resin-fill branch box (Y range) for 0.6/1 kV LV cables (copper or aluminium). Watertight, high-quality shells, resin storable up to 40 months.
View product
Resin-fill junction box
Universal resin-fill junction box for 0.6/1 kV LV cables (copper or aluminium). Transparent polycarbonate shells, watertight, anti-hydrolysis PUR resin.
View product
RFOU FOR OFFSHORE - JACKET
Cable for offshore oil platforms / halogen-free / fire-retardant / Sheath resistant to oil-based drilling muds and seawater. SUITABLE FOR CATHODIC PROTECTION APPLICATIONS
View product
U1000 R2V cable
Unarmoured rigid U1000 R2V cable (NF C 32-321) with copper conductor, XLPE insulation and black PVC sheath. For power supply or fixed-station links. Sizes 1.5 to 70 mm².
View product
6D box
6D aluminium measurement box to connect buried cathodic protection equipment and take potential or current measurements. 2 to 6 copper bars.
View product
AJB box
AJB measurement and distribution box in sheet steel (IP55, 100×80×30 cm), with 10 RBCA 1 Ω/100 W resistors, 10 shunts 10 A/100 mV and copper bars. On two support tubes.
View product
Exd distribution box
Flameproof (Exd) current distribution box for cathodic protection, configurable to order. Example: 300×500 mm, 11 copper sectioning bars and a shunt.
View productNJB box
NJB measurement and distribution box in sheet steel (IP55, 100×80×30 cm), with 12 RBCA 1 Ω/100 W resistors, 12 shunts 10 A/100 mV and 13 copper bars. On two support tubes.
View product
PCTE box
PCTE measurement and distribution box in sheet steel (IP55, 60×80×30 cm), with 8 RBCA 1 Ω/100 W resistors, 8 shunts 10 A/100 mV and copper bars. On a galvanised support tube.
View productPMD box
PMD measurement and distribution box in sheet steel (IP55, 100×80×30 cm), with 12 RBCA 1 Ω/100 W resistors, 12 shunts 10 A/100 mV and 13 copper bars. On two support tubes.
View product
Exd distribution box
Flameproof (Exd) current distribution box for cathodic protection, configurable to order. Example: 300×500 mm, 10 resistors 100 W, 11 sectioning bars.
View product
Exd insulating joints box
Flameproof shunting box (Exd, ATEX zones 1 and 2) to control cathodic protection interference between pipelines. Marine aluminium alloy, IP66.
View productJunction boxes
Coffret simple pour raccordement et protection des connexions en installation de protection cathodique.
View product
Tubular cable lugs
Crimp tubular cable lugs in tinned electrolytic copper, with inspection hole and flared entry. Sizes from 1.5 to 16 mm² and above, M2 to M12 bores. Packed in 100s.
View product
H07RN-F cable
H07RN-F round neoprene cable 450/750 V with flexible copper conductor, for the power or control supply of mobile equipment. Sizes from 1.5 to 70 mm², black PCP sheath.
View product
H07RN-F TENAFLEX® SR cable
H07RN-F TENAFLEX® SR round neoprene cable 450/750 V with flexible copper conductor, conductor 85 °C. Low voltage drop, sizes 1.5 to 70 mm². CENELEC/UTE/BS standards.
View productH07RN-F TITANEX® cable
H07RN-F TITANEX® round neoprene cable 450/750 V (HD 22.4 / NF C 32-102-4) with flexible copper conductor. For mobile equipment and demanding installations. Sizes 1.5 to 70 mm².
View productXLPE/PVC/SWA/PVC cable
XLPE/PVC/SWA/PVC armoured power cable (BS 5467) 0.6/1 kV, copper conductor, XLPE insulation, galvanised steel wire armour. Reinforced mechanical protection, sizes 1.5 to 120 mm².
View product
Cathodic protection cable
Single-core 0.6/1 kV cable for the DC supply of cathodic protection circuits of buried or immersed structures. Copper conductor, HDPE insulation, black PVC sheath.
View product
Tinker & Rasor T-3
The T-3 and T-1 type test post are compact and very competitively priced.
View productPin brazing S30 X/C (stud welding)
Portable S30 X/C pin-brazing unit to connect cables in cathodic protection and earthing. 360° weld on steel, 40-60 brazes per charge, 36 V DC, interchangeable batteries.
View productPlatine 1 R
Platine 1 R — accessoire de raccordement pour installations de protection cathodique.
View product
8VS measurement plate
8VS monobloc measurement plate (IP2x) for the cathodic protection of buried or immersed structures. 8-way 16 mm² connector, gold-plated watertight Ø4 banana terminals.
View product
Resistor plates
Custom-built current-exchange management plates: 1 to several resistors (0.1 to 470 Ω, 25 to 950 W), choice of ways, shunts, with or without enclosure (Exd, steel, stainless).
View product
Claw connectors
Tinned claw connectors (hot-stamped brass, steel hardware) for cable connection by stirrup. Sizes from 4 to 150 mm² depending on reference, packed in 10s or 25s.
View productRBC-RBCA resistor
Low-value, high-dissipation RBC/RBCA adjusting resistors, ribbon or wire wound on steatite. Power 25 to 600 W, values 0.056 to 680 Ω, surface up to 450 °C.
View product
Accessoires de câblage
Divers accessoires de câblage et installation : trousses de jonction ou dérivations à couler, cosses, manchons, gaine TPC.
View product
Secure PMM200 terminal
Modular PMM200 measurement point in painted stainless steel for outdoor installation: measurements, junctions and integration of active equipment. Configurable, triangle lock.
View product
PM100 potential test terminal
PM100 renovation measurement point in stainless steel, to replace a plastic terminal or aluminium box on a Ø2" tube. 8VS plate, clip mounting without hardware, triangle lock.
View product
BO400 oval surface box
BO400 oval surface box (cast iron or synthetic, NF EN 124-5) to bring CP cables or measurement wells up to a roadway or concrete pad. 400 kN rating, equippable on request.
View product
Tool kit
Tool set for the inspection, maintenance and installation of cathodic protection systems, supplied in a backpack, shockproof case or metal toolbox. Configurable.
View product
2D box
2D aluminium measurement box to connect buried cathodic protection equipment and take potential or current measurements. 2 to 5 cable entries.
View product
Coffret de répartition
Coffret de raccordement des éléments de protection cathodique (puissance et mesure), personnalisable selon l'usage.
View product
Silver adhesive 336
Two-part silver-filled epoxy adhesive, electrically conductive, to connect a cable to a pipe or structure in an ATEX zone. Room-temperature curing, -40 to +150 °C.
View product
Câbles spéciaux
Câbles de puissance et de mesures adaptés à tous types d'environnements : U1000 R2V, U1000 RVFV, H07-RNF, Kynar.
View product
TPC corrugated conduit
Polyethylene TPC corrugated conduit (NF EN 50086-2-4) for protecting buried electrical cables and ducts. Janoflex® notched couplers, colours by network, 25 m coils.
View product
Warning mesh
Polyolefin warning mesh to signal a buried structure, laid 0.20 m above the pipeline. Standardised colours by network, rolls of 100 × 0.30 m.
View product
Handy Caps – Connection protection
Handy Cap™: 102 × 102 mm prefabricated cap to protect anode or test-wire connection welds on pipes and tanks. Hand-applied, insulating and watertight.
View product
Janoflex TPC N
Janoflex® polyethylene TPC conduit (NF EN 50086-2-4) for protecting buried electrical cables and ducts. Notched couplers, colours by network, 25 m coils.
View product
Magnetic manhole cover lifter
Magnetic lifter for opening manhole covers. Ultra-compact lightweight model (3.5 kg, neodymium magnets) or heavy-duty model up to 650 kg with a triple movable magnetic plate.
View product
Butt-stop ferrules
Butt-stop joint ferrules in tinned electrolytic copper tube, for end-to-end conductor connection. Sizes from 1.5 to 120 mm², packed in 100s.
View productPatte de fixation type RM-001A
Patte de fixation type RM-001A pour le montage d'équipements de protection cathodique (joints isolants, structures).
View product
PC crossing point (6D+R box)
Aluminium PC crossing-point box for resistive electrical continuity with third-party works crossing the line. Variable RBCA resistor to attenuate interference.
View product
C connectors
Branch C connectors in tinned electrolytic copper for cathodic protection and industrial electricity. Sizes from 16 to 120 mm², packed in 100s or individually.
View product
Electrical installation tape
Scotch® electrical insulation tapes (Super 33+ and 22 vinyl) for insulating and protecting LV/HV cables. Resistant to UV, acids and alkalis, self-extinguishing.
View product
CADWELD® Plus welding
CADWELD® Plus exothermic welding: filler metal and ignition in a sealed capsule, no ignition powder. Permanent corrosion-insensitive bond, beyond IEEE 837.
View product
Exothermic welding
CADWELD® exothermic welding for permanent copper/copper, copper/steel or steel/steel electrical bonds, with no external energy source. Corrosion-resistant.
View product
Soudures aluminothermiques
Divers produits et systèmes de soudures aluminothermiques pour raccordements de protection cathodique.
View product
MRL conduit
Threaded MRL conduit (ROS) for the mechanical protection of electrical wires and cables. High mechanical strength, watertight, halogen-free, non-flame-propagating. DN20 to DN50.
View product
Spark Gap - Dehn
Dispositifs de protection foudre pour structures isolées. Gamme Dehn : EXFS100, KU, L.
View productDuplix labels
Robust Duplix marking labels for identifying cables on site (digits 0-9 and letters A-Z), with label holder.
View productOur technical teams are here to advise you
A specific project? A technical question? Our engineers support you in choosing the equipment suited to your installation.
Contact an expertL'académie IPSI Solutions
Restez informé des dernières innovations et bonnes pratiques en protection cathodique
Corrosion par courants alternatifs : analyse selon l'ISO 18086
La corrosion AC détruit vos pipelines même quand la protection cathodique DC semble parfaite. L'ISO 18086 fournit la méthode pour détecter ce risque invisible.
Protection cathodique des bacs de stockage : sécuriser vos installations pétrolières
Les fonds de bacs de stockage pétroliers sont vulnérables à la corrosion. La protection cathodique les protège efficacement.
Alliages de protection cathodique : normes et compositions
Aluminium, zinc, magnésium, fer-silicium : les normes, les éléments d'alliage clés et le domaine d'emploi de chaque famille d'anodes de protection cathodique.
A cathodic protection project?
Our engineers are at your disposal to study your requirements and propose custom-built solutions.
Réponse rapide
Sous 48h
Expertise certifiée
Ingénieurs NACE
Support continu
Maintenance 24/7