Trojan insulating kits / gaskets
Réf. DIP-230
Trojan sealing gaskets with an elastomer element encapsulated in an insulating carrier (groove 92-94% filled). Reliable sealing at low bolt load. Nitrile, Viton® or PTFE by temperature.
Description
For reliable static sealing, the Trojan gasket is an essential solution. The elastomer sealing element is encapsulated in an electrically insulated carrier, which limits its exposure to aggressive environments, chemicals and corrosive fluids to micro-exposure only. The controlled containment of the elastomer sealing ring within the carrier achieves a 92-94% filled groove.
A constant, controlled sealing pressure is thus obtained without requiring excessive bolt loads; this load reduction allows the use of thinner flanges, with smaller bolt circles and drillings. The most commonly used sealing-element materials are Nitrile® (-50 to +115 °C), Viton® (-59 to +200 °C) and PTFE (-254 to +232 °C).
Caractéristiques techniques
| Type | Trojan insulating sealing gasket (APS) |
| Principle | Elastomer element encapsulated in an insulated carrier |
| Groove fill | 92-94% |
| Materials | Nitrile® (-50 to +115 °C), Viton® (-59 to +200 °C), PTFE (-254 to +232 °C) |
| Strength | Low bolt load (thinner flanges) |
| Use | Insulating static sealing of flanges |
Documentation
Demande de prix
Ajoutez ce produit à votre demande et envoyez-la en une seule fois depuis le formulaire.
Documentation
A cathodic protection project?
Our engineers are at your disposal to study your requirements and propose custom-built solutions.
Réponse rapide
Sous 48h
Expertise certifiée
Ingénieurs NACE
Support continu
Maintenance 24/7