Équipements de canalisation

ProGal JPC insulating kit

Name: ProGal JPC insulating kit
Brand: IPSI Solutions
SKU: DIP-150

Réf. DIP-150

ProGal JPC flange insulating kit for low pressure and temperature, ideal for difficult assemblies (low clearance, damaged flanges). Gylon® 3504 gasket, AA4 or AA1.

ProGal JPC insulating kit: overview

ProGal JPC is ideal for dielectric isolation at low pressure and low temperature, and for difficult assemblies (low clearance, damaged flange faces, volatile products…). It is used in PN10 to PN64 (limited to P < 55 bar), over a -100 to +120 °C range, and is available in AA4 and AA1 kits.

The gasket is in Gylon® 3504 (3.2 mm thick, standard DIN E-2505, compressibility 25-45%, dielectric strength 9.6 kV/mm, <55 bar, -268 to +260 °C). The sleeves are in bakelised paper (DIN HP2065, 8.3 kV/mm) and the insulating washers in G10, suited to torque tightening (CETIM tests). Zinc-plated steel bolting is supplied as standard for AA4 kits; tightening-torque calculation is available on request.

ProGal JPC insulating kit: technical specifications

Type	ProGal JPC flange insulating kit (low pressure / low temperature)
Pressure	<55 bar (PN10 to PN64)
Temperature	-100 to +120 °C
Gasket	Gylon® 3504 (DIN E-2505, 9.6 kV/mm)
Sleeves	Bakelised paper (DIN HP2065, 8.3 kV/mm)
Washers	G10 (controlled tightening, CETIM)
Strength	Difficult assemblies (damaged flanges)
Versions	AA4 and AA1