Casing seal type STVM

Description

The type STVM casing seal allows cable ducts to be routed and held in the casing, using plastic supports fixed by clips to the inner wall of the casing and foam segments positioned on the pipe.

The plastic supports are cut to the appropriate length according to the segment recesses; the cable duct is drawn between the semi-circular recesses (which can be slightly enlarged with a blade if needed). The foam segments are inserted into the casing, the raised flange resting on the outer face to secure the support. The protection sleeve is finally slipped over the pipe and fixed by the supplied clamps.

Caractéristiques techniques

Documentation