Casing seal type STM
Réf. DIP-111
Continuous STM casing seal (Rottolin) for strong eccentricities or multiple openings (cable ducts). Reinforced STMV version. Pipes 50-1200 mm, stainless clamps.
Description
The continuous STM casing seals are made to special requirements and available for almost all pipe sizes. This type of sealing sleeve is particularly suited to pronounced eccentricities or when several openings are required (for example for additional cable ducts). It is reserved for new installations (split version on request, installation service available) and comes in a reinforced STMV version for high mechanical loads.
The material is Rottolin, about 6-8 mm thick (STM) or 9-11 mm (STMV) and with a Shore A hardness of about 50 ± 5. Pipe sizes range from 50 to 1200 mm and casing sizes from 200 to 1600 mm (see the current price list). It provides eccentricity compensation and pipe positioning. Stainless steel clamps.
Caractéristiques techniques
| Type | Continuous casing seal STM (reinforced STMV) |
| Material | Rottolin |
| Thickness | STM ≈ 6-8 mm, STMV ≈ 9-11 mm |
| Hardness | Shore A ≈ 50 ± 5 |
| Pipes | 50-1200 mm |
| Casings | 200-1600 mm |
| Strengths | Strong eccentricities, multiple openings |
| Clamps | Stainless steel |
Documentation
Demande de prix
Ajoutez ce produit à votre demande et envoyez-la en une seule fois depuis le formulaire.
Documentation
A cathodic protection project?
Our engineers are at your disposal to study your requirements and propose custom-built solutions.
Réponse rapide
Sous 48h
Expertise certifiée
Ingénieurs NACE
Support continu
Maintenance 24/7