Measurement well
Réf. DIP-077
PVC Ø50 mm measurement well with buried test coupon, silver brazing and epoxy resin. Areas from 1 to 100 cm², heights 0.50 or 1.45 m, H07RN-F cable.
Description
The measurement well consists of a PVC body (Ø50 × 3.7 mm) with a steel ring (hot-rolled mechanical tube, bonded with Araldite to the PVC), a test coupon and a flexible H07RN-F 1×2.5 mm² electrical cable. The cable is embedded in the steel then silver-brazed at 40% (no tin brazing), with an epoxy resin (no polyester) and a protective cap. Anti-corrosion protection on the coupon is to be removed before use.
The available coupon areas are 1, 5, 10, 25, 50 or 100 cm². The height is 0.50 m (standard cable 3.50 m, 3 Colson clips) or 1.45 m (cable 4.50 m, 5 Colson clips). To specify when ordering: the coupon area, the height and the cable length.
Caractéristiques techniques
| Body | PVC Ø50 × 3.7 mm |
| Ring | Hot-rolled steel (Araldite bonding) |
| Brazing | Silver 40% (no tin) |
| Resin | Epoxy |
| Cable | H07RN-F 1×2.5 mm² flexible (length on request) |
| Coupon areas | 1 / 5 / 10 / 25 / 50 / 100 cm² |
| Heights | 0.50 m (cable 3.50 m) or 1.45 m (cable 4.50 m) |
| Clips | 3 (0.50 m) or 5 (1.45 m) Colson |
Documentation
Demande de prix
Ajoutez ce produit à votre demande et envoyez-la en une seule fois depuis le formulaire.
Documentation
A cathodic protection project?
Our engineers are at your disposal to study your requirements and propose custom-built solutions.
Réponse rapide
Sous 48h
Expertise certifiée
Ingénieurs NACE
Support continu
Maintenance 24/7